A Comprehensive Guide and In-Depth Reviews of the Best Component Speakers
#1. Alpine SPR-60C 6.5" Car Audio Component System (Editor's Choice.)
Looking for the best component speakers to install in your car and upgrade your audio system? If yes, you’ve come to the right place. Here, I will provide you a complete guide along with reviews of the best options you can have on the market today.
Looking for a component speaker could be quite challenging for some as certain factors must be considered. But, if you are guided with what to do, then everything else will be a lot easier. So, continue reading for you to decide which one is the best to choose.
What are component speakers?
Component speakers are those which are capable of providing dedicated sound quality by the separate driver. They could be included with two tweeters, two woofers, and two external crossovers. And the drivers are being mounted at different locations from one another, but they work as one.
The drivers of the component speakers might vary. Most of them would go with two woofers and two tweeters. However, there are some that would come with an extra driver referred as the mid-range. It is the one responsible for handling mid-frequencies rather than handling the woofer to provide overall better sound quality.
Nevertheless, you could enhance this audio system by adding super subwoofers and tweeter. Subwoofers will handle the low frequencies at the same time providing incredible boost bass while the tweeters would handle the high frequencies intended for better sound quality.
What to look for?
So, what are the factors that you should look for before buying component speakers? They are the following:
Power handling refers to the measurement wherein a manufacturer would give to rate regarding how much power a speaker can handle and also operate at. It could be given by the two measurements which are RMS and Peak.
This RMS power rating is about the amount of power which a speaker can handle only in short bursts. Also, this rating is a lot more relevant and very crucial rating to always consider.
This factor refers to the frequencies that the speaker will emit sounds at, and frequency range is measured in Hz. Often, they are given from low to high frequency. And this will measure how low or high the speaker might emit sound at.
Sensitivity is about the measurement of the amount of sound which a speaker emits from a given power. A higher sensitivity means a more efficient speaker. The low powered systems will consider higher sensitivity rating then vice versa. Higher power is handled by lower sensitivity rated speakers.
Materials and Designs
And of course, the materials and the designs of the speakers must also be considered once shopping for the best component speakers.
So, how to choose the best speaker materials?
As said earlier, speaker materials play a great role in determining the durability and sound quality of the speaker. With that, here are the factors to take into account:
Tweeter elements affect the kind of sound that a speaker produces. You should look for tweeters that are made of soft materials such as textile blends, silk, and poly to offer you a mellow and refined sound. You might also choose the one which is made of hard materials such as ceramics, metal, and graphite for a snappy and high bright.
Surround has the ability to allow the woofer cone to easily move as well as release its bolder bass. With that, there is a need for the surround materials to withstand the humidity and the temperature changes.
You must also choose surround materials made of rubber as it could last longer and can offer great performance. Cloth and foam surround will cost less but performs well.
It is important that the woofer materials are made of a stiff and lightweight material for it to produce low notes. Manufacturers often create woofer made of synthetic films such as polypropylene together with other materials like mica.
Component speakers will be lightweight and durable if they are covered with synthetics and woven fabrics with metals like titanium or aluminum. And they could even withstand moisture, heat, and cold.
How to install component speakers?
Installing component speakers might be more difficult than other speakers particularly if they are placed for optimal sound quality. Besides, the use of crossover needs cables which could be tricky to hide once installing these best 6x8 car speakers.
In most cases, many buyers would consider the help of professionals to install component speakers though the process is considered as a simple setup. The cost of the installation might increase based on the complexity of the system.
Apart from that, most high-end component setups will need some modifications to be made to the vehicle like larger holes cut in the door panels. But, this could lower the value of the car if the system is removed before the sale.
Essential Tips to Consider
And for some tips with regards to the best component speakers, consider the following:
- You should always match the speakers to your car. If you have decided to set up the new component speakers, there is a need for you to use a vehicle selector to find out whether which speakers best fit your car.
- Getting everything you need first must be considered. You might need foam baffles for protecting the speakers from dust and moisture. How about bass blockers that will improve the efficiency of the small speakers? They will remove the low frequencies that they aren’t designed to handle.
- There is also a need for you to have the right tools which would make it easier to take a door panel off or to remove the window crank.
- Dynamat will also lower the noise level inside the car which would offer improved bass, volume and clarity as well.
#1. Alpine SPR-60C 6.5" Car Audio Component System (Editor's Choice.)
Reviews of the Best Component Speakers
And now, for the in-depth reviews of the best component speakers, let us discuss them one by one.
Related post: Best 5×7 Speakers: How to Choose and What to Choose?
And there you have it! The top 5 best component speakers that you can choose from once you decide to install one. But, for the best pick, I would recommend the Alpine SPR-60C 6.5" Car Audio Component System. For the reasons behind my decision, consider the following:
- Top-notch quality component speakers with a high-quality feature that you will also surely love.
- You will be provided with great and clear sound that other speakers couldn’t offer.
- For someone looking for speakers with a great power handling, no doubt this is the best choice too.
- And it included different mounting styles as well.
- You will not have to worry about any distortion, and this choice guarantees beautifully-designed speakers.
With these reasons, will you still choose other options? For me, this one is the right choice.
Yes, it could be confusing to choose the best one since almost every speaker in the market boasts their best features too. With that, you need to be extra careful during your selection process. Again, bear in mind the factors needed to consider and also the reviews of each product. This will help you a lot!
Leave your comments below for any suggestions or questions about the best component speakers. We will be very pleased to read your thoughts!