Easiest Way on How to Adjust Camber on Chevy Truck
Are you wondering how to adjust camber on Chevy truck? Did you know that you can do it on your own? Find out how you can adjust the camber on your Chevy truck by reading the information below.
Doing some of the basic car maintenance by yourself n can save you a lot of cash. If you are just going to change the oil or tune the alignment of the car, then doing it on your own is best. But when it comes to adjusting the camber, some people are having second thoughts about it. The reason behind this is because it can be pretty tricky. Unfortunately, vehicles don't have an adjustment camber built in where it was manufactured.
The good news is, there is adjustment kit for camber which you can purchase so you can do it on your own. The kit will include all the things that you need and the instructions so you can adequately install everything correctly.
Camber
The camber in your car is the one that you see that is in vertical angle when you are looking at your car. If your wheels are closer together at the top part, then this means that you have a negative type of camber. On the other hand, the wheels that are closer together at the bottom portion are considered as positive camber. Depending on the car that you have, manual vehicles will usually have a camber that is slightly negative, as the stability increases.
If this is your first time to adjust camber on your Chevy truck, then the information below will surely be helpful. You don’t need to worry about anything at all because the steps on how to adjust camber on Chevy truck below are easy to follow. This means that it is perfect for beginners, and for people who are looking for the easiest way to adjust their Chevy truck’s camber without needing professional help.
Things You’ll Need to Adjust Camber on Chevy Truck:
Steps on How to Adjust Camber on Chevy Truck
Step #1 Preparing Yourself
The first thing that you need to do is to prepare yourself before doing any work. The preparation includes wearing the proper clothing, such as long pants, a long sleeve shirt, a pair of gloves and boots. You should also wear goggles to ensure that there will be no debris that may accidentally fly into your eyes.
Step #2 Putting the Chevy Truck on the Rack
The next thing that you need to do is to put the Chevy truck on the rack, as this will help you align the truck accurately. When it comes to measurement alignment, you need to make sure that you follow the instructions of the rack. The reason behind this is because it will help you in figuring out the size.
Step #3 Check if The Chevy Truck Has Camber Bolts
You need to ensure that your Chevy truck has camber bolts. You can do this by looking at the vehicle’s strut bolts. For people who don’t know, the camber bolt of the variety in the aftermarket will include a washer with a small handle. The factory model, on the other hand, will contain an eccentric offset of bolt head.
Step #4 Making the Bolt Loose
Using the impact gun, make the bolt that is non-camber a little less loose. But if you have a camber that is an aftermarket, you can use two wrenches to make it less tight. It would be best to have someone with you so he can assist you with the bolts once they start to get loose.
Step #5 Adjusting the Tire
Adjusting your tire would be the second to the last step. You can change the tire by getting a measurement as close as possible to the measurement that you desire. Once done, you can secure the strut bolt using the two wrenches that you have used earlier. If you hear tires noise after rotation of the wrench, it would be best to loosen the bolt again so you can fix the problem with the strut bolt.
Step #6 Lowering the Chevy Truck
The last step would be lowering the Chevy truck from the rack. You can do this the way you lifted the vehicle. This will avoid putting the Chevy truck suddenly, which can cause problems and even damages.
Conclusion
These are all of the information on how to adjust camber on Chevy truck in the easiest way possible. Always remember to ensure that you have an assistant with you, so he can help you with the bolt and with the checking if everything is in place.